جديد ماكينة التمليط Małek Agregaty M-5 MAX 400V

Our offer includes plastering units for feeding mortars, distinguished by high quality and careful workmanship, and above all, reliability, which is extremely important in the construction industry, due to the tight work schedules.
The proposed devices have appropriate approvals and CE certificates. In response to customer expectations, we create solutions that meet the requirements, always putting accuracy and the highest standards first.
The choice of our plastering units guarantees efficient and uninterrupted operation. Choose the model that will work best for your business. Each of the proposed machines has a different specification, carefully reading the information will enable you to select the optimal device that will meet your requirements and expectations. Below we present the most important information about the M-5 MAX 400V plastering unit model in a modular system.


PURPOSE OF THE GENERATOR
IN A MODULAR SYSTEM

The M-5 MAX 400V plastering unit is designed for mechanical feeding of mortars with a grain size of up to 3 mm (adapted for mechanical feeding according to the manufacturers' recommendations), such as:
gypsum plaster
gypsum-lime plaster
cement
lime plaster
lime and cement plaster
mortar
damping plaster
joint mortar
reinforcement and adhesive mortar
machine spouts
adhesives, lime plasters
anhydrite screeds
other


The unit's tank can be filled with bagged material or via a pass-through or blower cover.
The MODULAR SYSTEM consists of:
trolley (bottom of the unit)
material hopper
unit funnel
engine base
compressor

Basic equipment of the unit
1. feeder gear motor 0.83 kW S3-70%; 29 rpm 400V
2. gear motor feeding pump 6.05 kW S3-60% 415 rpm 400V
3. PE 70T 0.9 kW FORAS water pump
4. pump unit D6–3 stator + rotor
5. air compressor 0.9 kW 250 l/min, pressure 5.5 bar
6. cleaning unit – shaft and cleaner
7. socket wrench for screwing in the rotor
8. cleaning ball for the working hose, diameter 30
9. water meter 150 – 1500 l/h
10. DN25 working hose 10 m with camlock connectors
11. reinforced water hose ¾” 25 m, fitting: pressure geka and geka with connector
12. reinforced air hose 3/8” 12.5 m fitting 2 x geka with connector
13. power cable 5x 2.5mm2 20 m with a 5B PCE 32A plug
14. 75 cm spray lance with Ø 12 nozzle
15. gun scraper
16. a key for unscrewing the water reducer glass
17. mixer
18. pump yoke DN25 male camlock connector type D
19. spray gun for producing water mist




Additional equipment of the unit

1. working pressure clock with plaster separator 100 bar DN25
2. cover of the plastering unit
3. 42V measurement probe
4. various types of gun nozzles: pink, black, black conical
and various sizes fi: 8,10,12,14,16,18
5. lance tube of different lengths: 25 cm, 75 cm, 100 cm, 125 cm, 150 cm
6. pump yoke for DN35 type D screeds
7. pump yoke for DN35 screeds, type R
8. pump yoke DN25 male camlock connector type R
9. 35 mm hose for spouts
10. working pressure clock with separator for 100 bar DN35 spouts
11. rotomix type D DN35/25
12. rotomix type R DN35/25
13. tarpaulin - cover for the plastering unit
14. control button with a cable of various lengths: 12 m, 20 m, 30 m
15. extension for the M-5 unit, original Małek 96 liters






The main components of the unit
Components that can be removed from the unit if necessary (including transport) are:
compressor
water pump
mixing chamber with mixing pump
feeder wheel
feeder wheel cover
charging grate
unit basket

The weight of the unit with all main components is 254 kg.






Advantages of the M-5 Max 400V Plastering Unit in a MODULAR SYSTEM:

built-in AUTO/0/HAND water pump operation switch
control of reversing the mixture at reverse speed in the event of a blocked mixture
the electrical box was assembled with EATON components
the machine has a built-in phase replacement and sequence sensor
filling height 950 mm
tank capacity approx. 150 l
pressing pressure max 40 bar
feeding distance max 40 m
possibility of connecting a silomate
possibility of connecting a remote control to control the unit
possibility of connecting the gun to facade plaster and garage systems
possibility of disassembly into individual components: trolley (bottom of the unit), material container, hopper of the unit, engine base, compressor

It also has two 230V sockets, one controlled for connecting an additional pump to power the tank, the other for connecting e.g. an LED lamp. The machine is equipped with a button that allows the mixture to be reversed in the event of a blockage in the hoses.
It also has a phase replacement and sequence sensor.



The M-5 Max unit set includes:
water hose 3/4” 25m 10 bar
hose close