جديدة ماكينة تغيير إطارات الشاحنات TyreON T700 truck tyrechanger 42 Inch 2 mounting speeds - power 4kW+2.2

Rims 14 - 42 Inch
Wheels up to 1600 kg - Ø 230 cm - 105 cm ↔
Mounting speed 2-speed | 5 + 10 rpm
Bead breaker force 3300 kg / 32.360 kN
Operation Electric-hydraulic
Gear motor-chuck 3.3 - 4.0 kW
Hydraulic pump 2.2 kW
Optional 56 Inch extensions
In wooden box L223 x W194 x H105 cm - 850 kg
Voltage 400V (no compressed air required)
Including Free accessoires

Heavy duty truck tyrechanger for tube and tubeless tyres and rims of
Construction- and earth moving equipment
Agricultural tractors, vehicles and machines
Trucks, tractor units and trailers
City buses, coaches and commercial vehicles
The control unit on the moving arm allows one to perform 12 automated movements driven by two heavy motors. You can change tyres at 5 or 10 rpm.
TyreON T700 - delivered ready for operation
Reliable and very powerful truck tire changer
CE certified and 1 year warranty on all parts
Compiled with Bucher Hydraulics - market leader in innovative drive technology
Filled with hydraulic oil and fully tested before it is packed
Comes with accessories to change truck tires directly
Solid construction, completely finished with powder coating
Very strong clamping and bead breaking force, controlled by joysticks
Ready for use upon receipt, easy to install
With a central lifting eye and floor anchoring holes
With main switch, cord and power plug - no compressed air required!
Optional: set of 4 chuck extensions - 56 Inch
Stable operating pressure - optimum performance
The allround TyreON T700 has a check valve in the middle of the hydraulic system. This valve ensures a constant operating pressure due all hydraulic movements are equal and can be used to their full power potential. The pressure on the hydraulic pump is reduced, allowing the machine to work optimally and have a longer technical lifetime.
Reliable - 3 kW engine - for intensive use
The TyreON T700 is a truck tyre changer for intensive use, the powerful mounting arm with the disc and the hinged hook is resistant to heavy loads.
A plastic strip in a recess in the hook prevents wear and scratches on the (alloy) rim.
The hinged parts are fitted with grease nipples, by lubricating each nipple the truck tyrechanger will operate smoothly and wear and tear is prevented.
How it works - controller on moveable arm
The controller allows one to operate 12 automated movements.
You simply roll the wheel onto the ramp and the machine takes care of the rest.
All-in-one ergonomic controller on movable arm with joysticks for precise adjustment
Powerful 2-speed 4.0 kW electric motor for clockwise and anticlockwise rotation of the chuck
Top quality 2.2 kW hydraulic aluminum gear pump manufactured by Bucher Hydraulics
With a hydraulic ramp to move the wheel to and from the chuck
Chuck with 4 hydraulic clamping arms of hardened steel for clamping and lifting the wheel
The mounting arm moves hydraulically up and down
The mounting arm is hydraulically movable and lockable at any position on the sliding carriage and moves horizontally by the hydraulic sliding carriage in both directions
The mounting head with dish and hook can be turned manually and locks itself
Truck mounting accessories available
The techniques and possibilities of the TyreON T700
Technical details T700 (400V)      
         
For rims with size 14 - 42 Inch A  
Maximum wheel diameter 230 cm D  
Maximum width of the wheel 105 cm C  
Maximum wheel weight 1600 kg    
Clamping range  (chuck) 11 - 114 cm (43 Inch)      
Bead breaker force 3300 kg / 32.160 kN   F  
Operating pressure - hydraulic 200 Bar    
Performance hydraulic pump motor 2.2 kW F  
Performance gear motor -  electric rotation of the chuck 3.3 - 4.0 kW E  
Mounting speed - rotation of the chuck - clockwise and anticlockwise 2 speed    
Rotations per minute of the chuck 5 - 10 rpm    
Number of automated movements by controller 12 movements    
Operating voltage of the controller 24 Volt (DC)    
Number of positions of the mounting arm on the sliding carriage stepless positions    
Weight 850 kg    
Noise level 55 - 70  dBA    
Rotating chuck with 4 self centering clamping arms ✓      
Non return valve - continuous oil-pressure ✓      
Grease nipples ✓      
Second gear for high speed of all hydraulic movements  (2nd foot pedal) -      
Voltage 400V - 3Ph     
Fuse 20A      
Footprint (length x width) 188 x 174 cm      
Delivery
All functions of the TyreON T700 are tested carefully before the machine is packed in a sturdy wooden box with:
The wired control unit with movable arm
A grease gun and lubricant for the silding carriage etc.
A set of plastic strips intended for in the mounting hook
2 tire levers, a tyresoap brush and a bucket tyresoap
The installation and operating manual
Hydraulic oil (hv-iso-32 is included)
TyreON TRC ST rim clamp for trucks, agricultural and contsruction equipment
T700 truck tyrechanger 42 Inch 2 mounting speeds - power 4kW+2.2kW