مخرطة المعادن Heidenhain DataPilot 4290

This GILDEMEISTER CTX 310 Lathe was made in 2003. It is equipped with a HEIDENHAIN DataPilot 4290 control unit. The machine has a spindle speed of 5000 rpm. Its technical condition is normal with an accuracy of 0.01 mm. Throughout the years it was continuously maintained.
In 2022, the main drive card and main engine were replaced. In December 2022, the main spindle bearings were exchanged. The replacement was made with new parts. The basic machine is equipped with a hydraulic chuck. Full documentation is available.
application type: Turning
Location: Hungary
machine type: Lathe
availability: Immediately
control unit brand: HEIDENHAIN
GINDUMAC ID: HU-TUR-GIL-2003-00002
Measurements width: 3200 mm
Measurements depth: 1715 mm
Measurements height: 1770 mm
Spindle speed range: 5000 1/MIN
Spindle motor power: 21 kW
Spindle bore: 65 mm
Number of axis: 2
X-AXIS Movement: 250 mm
Z-AXIS Movement: 635 mm
Workpiece weight: 110 kg
Number of turrets: 1
Number of tool slots: 12
Rotating tools: Yes
Tool taper: VDI 30
Its technical condition is normal
continuously maintained. Its accuracy is 0. 01 mm.- In 2022
the main drive card and main engine were replaced in the machine.- In december 2022
the main spindle bearings were replaced in the machine. The replacement was made with new parts