ماكينة ضبط الحواف Felder FORMAT 4 Tempora60.06LX

This Felder FORMAT 4 Tempora60.06LX edgebander was manufactured in 2019. It features an x-motion PLUS control system, chain feed with a speed of 10 m/min, and a Teflon-coated gluing unit for EVA or PUR granulate. The machine supports edge thicknesses from 0.4 to 3 mm and includes a multifunctional milling unit. Consider the opportunity to buy this Felder FORMAT 4 Tempora60.06LX edgebander. Contact us for more information about this machine.
Control system: x-motion PLUS
Chain feedFeed speed: 10 m/minDrive motor: 0.75 kW (S6) – 1.1 kW (S6)Minimum workpiece length: 140 mmMinimum workpiece width: 70 mmNote: Minimum width varies depending on workpiece length, height, and surface finish.
Feed speed: 10 m/min
Drive motor: 0.75 kW (S6) – 1.1 kW (S6)
Minimum workpiece length: 140 mm
Minimum workpiece width: 70 mm
Note: Minimum width varies depending on workpiece length, height, and surface finish.
Turntable edge magazine (rolled edge material)Turntable diameter: 750 mmEdge thickness: 0.4 – 3 mm
Turntable diameter: 750 mm
Edge thickness: 0.4 – 3 mm
Extendable frameWorkpiece support extendable up to 450 mm
Workpiece support extendable up to 450 mm
Upper pressure barManually adjustable workpiece height: 8 – 60 mm
Manually adjustable workpiece height: 8 – 60 mm
Edge feedFor rolls and rigid material
For rolls and rigid material
Joining unitPower: 2.2 kW (2 × 1.1 kW)Diamond cutter Z2Speed: 12,000 rpm
Power: 2.2 kW (2 × 1.1 kW)
Diamond cutter Z2
Speed: 12,000 rpm
Gluing unitTeflon-coated for 1.5 kg EVA or PUR granulateReady after approx. 10 min heating timeTool-free quick-change system
Teflon-coated for 1.5 kg EVA or PUR granulate
Ready after approx. 10 min heating time
Tool-free quick-change system
Pressure unitPneumatically controlled1 driven and 2 conical pressure rollers
Pneumatically controlled
1 driven and 2 conical pressure rollers
ShearFor roll edge material thickness: 0.4 – 3 mm
For roll edge material thickness: 0.4 – 3 mm
Cutting unitTwo high-frequency motors, each 0.35 kW, 12,000 rpmPneumatically swiveling 0° – 10°
Two high-frequency motors, each 0.35 kW, 12,000 rpm
Pneumatically swiveling 0° – 10°
Multifunctional milling unit (x-motion PLUS)Flush and radius millingOne HF motor top and bottom, each 0.75 kW, 12,000 rpmEach with 4 interchangeable blades
Flush and radius milling
One HF motor top and bottom, each 0.75 kW, 12,000 rpm
Each with 4 interchangeable blades
Corner processing unitFor soft and postforming workpiecesFront edge processingEdge thickness: 0.4 – 3.0 mmWorkpiece height: 10 – 60 mm
For soft and postforming workpieces
Front edge processing
Edge thickness: 0.4 – 3.0 mm
Workpiece height: 10 – 60 mm
Radius scraper unit2-axis motor-driven, position-controlledPneumatic release function
2-axis motor-driven, position-controlled
Pneumatic release function
Polishing unitTop and bottom
Top and bottom
application type: Edge Banding
Location: Germany
machine type: Edgebander