مخرطة المعادن Mazak INTEGREX 200 III S

Preis: Contact us for price
Machine is already dismantled
Machine Type: Used Multi-Tasking CNC Lathe / Turning Center
Manufacturer: MAZAK
Model: INTEGREX 200S III (IG 200S III)
Connected Load: 61.4 kVA
Operating Voltage: 400 V / 50 Hz
Pneumatic Pressure: 5 bar (500 l/min)
Machine Dimensions (L x W x H): 3,820 x 2,060 x 2,597 mm
Machine Weight: approx. 9,700 kg
Machine Color: Light Gray / Light Blue / Dark Gray / Gray
==================================================
WORKING CAPACITY & DIMENSIONS
==================================================
Max. Swing Diameter: 660 mm
Max. Turning Diameter: 660 mm
Max. Turning Diameter Over Carriage: 500 - 660 mm
Bar Capacity (Max. Diameter): 51 mm
Max. Workpiece Weight (incl. Chuck)
Chuck Workpieces: 100 kg
Shaft Workpieces: 150 kg
==================================================
MAIN SPINDLE
==================================================
Speed Range (infinitely variable): 35 - 5,000 rpm
Drive Power: 22 kW (30 min rating) / 15 kW (100% continuous operation)
Max. Torque: 349 Nm
Spindle Nose: A2-6"
Spindle Bore Diameter: 76 mm
Chuck Diameter: 210 mm
C-Axis Indexing: 0.0001°
==================================================
SECOND SPINDLE (SUB-SPINDLE)
==================================================
Speed Range: 35 - 5,000 rpm
Drive Power: 18.5 kW (30 min rating) / 15 kW (100% continuous operation)
Max. Torque: 326 Nm
C-Axis Indexing: 0.0001°
Chuck Diameter: 210 mm
==================================================
TOOL TURRET & DRIVEN TOOLS
==================================================
Tool Turret Design: Single-Spindle Turret (for stationary or driven tools)
Driven Tools Drive Power (20% Duty Cycle / ED): 15 kW (IPM Motor)
Tool Magazine Capacity: 20 Tools
==================================================
PUMP & COOLANT SYSTEM
==================================================
Pump Delivery Rate: approx. 20 l/min
Pump Pressure: approx. 5 bar
Pump Power: 635 W
==================================================
STANDARD EQUIPMENT & FEATURES
==================================================
B-Axis (0.0001° positioning axis)
C-Axis (0.0001°) & Y-Axis
Spindle orientation on second spindle
Synchronization of main and second spindle
Hydraulic 3-jaw chuck (210 mm diameter
KITAGAWA B-208) incl. 1 set of soft jaws (Main Spindle)
Hydraulic 3-jaw chuck (210 mm diameter
KITAGAWA B-208) incl. 1 set of soft jaws (Second Spindle)
Dual foot switch for opening/closing chucks (Main & Second Spindle)
Chuck status feedback (open/closed) for both spindles
Air blast device at chuck (Second Spindle)
Tool Pre-setter (Tool Eye)
Front door interlock / safety locking
Complete coolant equipment & full enclosure (coolant and chip guard)
Working area light
Find more here
إظهار قائمة الأسماء
Contact us at
إظهار قائمة الأسماء